Figure 4 Modular 適合中等輸出，采用自動化進料系統。Figure 4 Modular 的容量較多可擴展到 24 臺打印引擎，通過一個靈活的模塊化系統體系結構進行經濟實惠的零件生產，并提供單獨的后處理單元用于清潔、烘干和固化。Figure 4 Modular 能夠根據生產布局進行靈活調整，是一個經濟實惠的 3D 生產解決方案，可隨著您的業務增長而擴展，尤其適合單條高吞吐量生產線可以為眾多零件生產服務并且*選集中式后處理的情況。
周轉快
打印速度較快，可在一天內完成功能性原型迭代和小量生產。新設計可在短時間內交付，保持全程的開發勢頭不減。
應用：
快速功能性原型制造
小批量橋梁制造
鑄造模型
彈性零件
特點：
自動化材料處理
個別打印機模塊可能專用于個別材料
集中式后處理（清潔、烘干、固化）
好處：
六標準差質量和可重復性
高吞吐量與高生產效率
同一天內完成打印和運送
快速可擴展容量
*根據 Figure 4 模型的各種使用案例，吞吐量比其他 3D 打印系統有所提升，零件和運營成本也低于傳統制造。
Figure 4® Modular主機硬件
Build Volume (xyz) | 124.8 x 70.2 x 346 mm (4.9 x 2.8 x 13.6 in) |
Minimum Layer Thickness | 0.01 mm (0.0004 in) |
Resolution | 1920 x 1080 pixel |
Pixel Pitch | 65 microns (0.0025 in) (390.8 effective PPI) |
Wavelength | 405 nm |
Operating Environment Temperature Humidity (RH) | 24/7 operation 5-30 °C (41-86 °F) 30-70% |
Electrical | 100-240 VAC, 50/60 Hz, Single Phase, 15A/7.5A |
Compressed Air | Minimum pressure of 4.83 bar (70 psig) of dry air. 9.5 mm or 6.4 mm (0.38 or 0.25 in) OD tubing. Connections external to machine not supplied by 3D Systems |
Configurations | Base unit (controller and a printer), scalable to 24 auxiliary printers |
Dimensions (WxDxH) | Base unit (uncrated): 122.6 x 72.9 x 209.1 cm (48.2 x 28.7 x 82.3 in) Auxiliary printer (uncrated): 66.1 x 72.9 x 209.1 cm (26 x 28.7 x 82.3 in) |
Weight | Controller (uncrated): 98.5kg (217.2 lbs) Printer (uncrated): 190.5kg (420 lbs) |
Certifications | FCC, CE, EMC, UL |
Figure 4® Modular材料系統
Build Materials | UV curable plastics: Figure 4™ TOUGH-GRY 10 – Rigid dark gray Figure 4 TOUGH-GRY 15 – Rigid gray Figure 4 FLEX-BLK 10 – Flexible black Figure 4 ELAST-BLK 10 – Elastomeric black Figure 4 TOUGH-BLK 20* – Rigid black Figure 4 MED-AMB 10* – Transparent biocompatible Figure 4 JCAST-GRN* – Jewelry casting |
Material Packaging | 2.5 kg cartridges for automated replenishment |
Material Mixing (purchase separately) | Mixing Roller product recommendations are available upon request |
| 下載產品頁 |
|
Figure 4-Press.pd |  |
|  |
Figure 4 MED-AMB 10可以在高溫下滅菌和測試的硬質半透明材料 | Figure 4 MED-WHT 10可以在高溫下滅菌和測試的堅硬白色材料 | Figure 4 TOUGH-BLK 20堅固，類似于ABS的材料，具有長期的環境穩定性 | Figure 4 PRO-BLK 10生產級，用于生產零件的剛性材料 |
|  |
|  |
Figure 4 HI TEMP 300-AMBHDT*過300°C的耐高溫半透明塑料 | Figure 4 EGGSHELL-AMB 10工藝優化的材料，用于消失模澆鑄硅膠 | Figure 4 FLEX-BLK 20高穩定性，耐用且柔軟的塑料 | Figure 4 RUBBER-BLK 10耐用，類似橡膠的硬質材料 |
|  |  |  |
Figure 4 FLEX-BLK 10靈活耐用，生產類聚丙烯材料 | Figure 4 JCAST-GRN 10珠寶可鑄造材料，用于高分辨率圖案 | Figure 4 ELAST-BLK 10類橡膠，設計用彈性材料 | Figure 4 TOUGH-GRY 15經濟，適用生產的堅硬的灰色材料 |
 | |||
Figure 4 TOUGH-GRY 10高速，適用生產的硬質深灰色材料 |
