Hawke ICG 653/Universal Cable Gland（霍克防爆鎧裝電纜接頭）
Application
Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with:-
a） Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b） Cables that exhibit ‘cold flow’ characteristics.
c） Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.
Features
Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides armour clamping, using one clamping arrangement for all armour/braid types.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.
Materials & Finishes
The ICG 653/Universal cable gland is manufactured in Brass （standard）, Nickel Plated Brass, 316 Stainless Steel or Aluminum.
Brass NPT entries are nickel plated as standard.
Technical Data
Exd IIC Gb, Exe II Gb, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0058X.
IECEx Certificate No. IECEx BAS 06.0015X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 （30 metres for 7 days） to IEC/EN 60529 and NEMA 4X.
Deluge protection to DTS01.
Operating Temperature Range: -60°C to +80°C.
Alternative certification options available:
Exe II. Certificate No. 1024328 （LR 78713-9）.
BR-Exd IIC/Exe II. Certificate No. CEPEL 01.0065X.
GOST R-Exe IIU.
Exd IIC/Exe II.
GOST K - Approved for use in Kazakhstan.
Marine Approval. Certificate No. 06-LD142850B-PDA.
Marine Approval
RINA Certificate No. ELE030710CS
Hawke ICG 653/Universal Cable Gland
| CABLE GLAND SELECTION TABLE | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Entry Thread Size | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | |||||||||
| Inner Sheath/ Cores | ‘B’ Outer Sheath | ‘C’ Armour/Braid | |||||||||||
| Metric | NPT * | ‘D’ Max. Over Cores | ‘E’ Max. Inner Sheath | Max. No. Of Cores | Across Flats | Across Corners | |||||||
| Standard | Option | Min. | Max. | Orientation 1 | Orientation 2 | ||||||||
| Os | M20 | ½" | - | 8.9 | 10.0 | 6 | 5.5 | 12.0 | 0.8 / 1.25 | 0 / 0.8 | 67.0 | 24.0 | 26.5 |
| O | M20 | ½" | - | 8.9 | 10.0 | 6 | 9.5 | 16.0 | 0.8 / 1.25 | 0 / 0.8 | 67.0 | 24.0 | 26.5 |
| A | M20 | ¾" | ½" | 11.0 | 12.5 | 10 | 12.5 | 20.5 | 0.8 / 1.25 | 0 / 0.8 | 67.0 | 30.0 | 32.5 |
| B | M25 | 1" | ¾" | 16.2 | 18.4 | 21 | 16.9 | 26.0 | 1.25 / 1.6 | 0 / 0.7 | 73.6 | 36.0 | 39.5 |
| C | M32 | 1¼" | 1" | 21.9 | 24.7 | 42 | 22.0 | 33.0 | 1.6 / 2.0 | 0 / 0.7 | 78.0 | 46.0 | 50.5 |
| C2 | M40 | 1½" | 1¼" | 26.3 | 29.7 | 60 | 28.0 | 41.0 | 1.6 / 2.0 | 0 / 0.7 | 82.4 | 55.0 | 60.6 |
| D | M50 | 2" | 1½" | 37.1 | 41.7 | 80 | 36.0 | 52.6 | 1.8 / 2.5 | 0 / 1.0 | 88.7 | 65.0 | 70.8 |
| E | M63 | 2½" | 2" | 47.8 | 53.5 | 100 | 46.0 | 65.3 | 1.8 / 2.5 | 0 / 1.0 | 92.7 | 80.0 | 88.0 |
| F | M75 | 3" | 2½" | 59.0 | 66.2/65.3 † | 120 | 57.0 | 78.0 | 1.8 / 2.5 | 0 / 1.0 | 99.4 | 95.0 | 104.0 |
| All dimensions in millimetres （except * where dimensions are in inches）. Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT entry option. | |||||||||||||
Alternative Reversible Armour Clamping Ring （RAC）
| SELECTION TABLE | ||
|---|---|---|
| Size Ref. | Steel Wire Armour/Braid/Tape | |
| Orientation 1 | Orientation 2 | |
| B | 0.9 / 1.25 | 0.5 / 0.9 |
| C | 1.2 / 1.6 | 0.6 / 1.2 |
| C2 | 1.2 / 1.6 | 0.6 / 1.2 |
| D | 1.45 / 1.8 | 1.0 / 1.45 |
| E | 1.45 / 1.8 | 1.0 / 1.45 |
| F | 1.45 / 1.8 | 1.0 / 1.45 |
Ordering Information
Cable Gland Type/Size/Thread
e.g. ICG 653/UNIV/C/M32
ICG 653/UNIV/C/1¼" NPT
Ordering Information with Alternative Clamping Ring
Cable Gland Type/Size/Thread/AR
e.g. ICG 653/UNIV/C/M32/AR
ICG 653/UNIV/C/1¼" NPT/AR
Two part sealing compound and assembly instructions are supplied with the cable gland.
